|
UPDATE: I have found the problem that causes the B-button to stick, and also have a remedy for the situation. This can be found here after you read my mod below(or before, your call =]). DISCLAIMER: I am not responsible for what you do to your own hardware, I am only showing you what I did to suit my own purposes. If you want to try this yourself, you WILL void your warranty, and I cannot be held responsible for any error on your part. Please do not steal my work, but rather link to it. If you want to tell others about it, please mention my name Questions/Comments?: Email me at neal0007@tc.umn.edu Available Controller Mods 1. Control stick modification. Swap your control sticks for better control! This modification would be classified as easy. 2. Reason and solution for sticky B button. I researched the reason as to why many CUbers B-buttons stick during play and have found both the reason and solution! Look inside for further insight if you have been plagued with this problem. 3. LED rumble modification for half indigo, half clear controllers. Add a little flash to your indigo/clear controller. This mod will flash LED lights in sync with your rumble motor. 4. NEW!! 04/07/2002: Z-button modification My most in demand mod now completed!! I have added a z-button on the underside of the controller while keeping the existing z-button where it belongs. For all those that find the current z-button position uncomfortable, this is a mod you need to check out!! Pictures and instructions are found inside. |